Add beautifully rustic trim to your doors or windows with Custom Rough Hewn L-Headers. Made from weatherproof, high-density polyurethane, these headers are made in molds of natural roughly cut wood to capture every line and tool mark in amazing detail.
The headers are available in a wide range of custom size combinations to best fit your project specs. Choose from several attractive pre-finished options or Unfinished to stain or paint to the color of your liking.
Easy to install, you can add the headers as stand-alone accents above windows, doors or other entrance ways in just one day -- or use them as part of a bigger project with our matching Custom Rough Hewn Beams or Planks.
- Colors vary dramatically from monitor to monitor. For this reason we HIGHLY RECOMMEND reviewing a sample prior to ordering. The cost of up to five (5) samples will be deducted from a full-sized product purchase.
- Dimensions specified are outside dimensions of the product. Material is approximately 1 inch thick (+/- ¼ inch).
- Products are hand fabricated. Allow at least ½ inch tolerance when covering existing materials.
- Products have screws embedded in them that can easily be located with a stud finder. We recommend cutting with a hand saw to avoid injury. Barron Designs is not responsible for bodily harm or equipment damage if power tools are used.
- LTL shipping typically starts at about $300 per shipment. Shipping and tax estimates can be easily obtained under order details in the cart section of the website.
- L-headers that are 22 feet or longer will be manufactured as a single l-header then cut in half for shipping.
Corners Mitered Inner Dimensions Approximately 1” less than specified outer dimensions. These are hand fabricated, inner dimensions may vary slightly. Please allow tolerance when covering other materials. Textured & Finished Edges and Ends Available Material High Density Polyurethane Fire Rated Polyurethane Available Also available in this texture Beams, Custom Trusses, Arched Beams, Mantels, Planks Texture Heavily Distressed Manufactured In and Ships From North Carolina Touch-Up Kit Included? Yes - for factory-finished products. Use Interior/Exterior Outer Dimension Variance Outer dimensions can vary +/- ¼”. Products are hand fabricated, please allow a tolerance. Product Weight 4"x4"x10' is 8lbs. Actual weight, based on customizations, will be visible when the product is added to cart. Shipping L-headers that are 22 feet or longer will be manufactured as a single l-header then cut in half for shipping