null Skip to Content

Faux Brick Panels

Unsure where to start? Shop Samples

Add the classic touch and appeal of real brick to your interior or exterior without the cost or hassle of real brick. Whether you’re remodeling your home or designing a new business space, there’s a faux brick panel for you. 


Our faux brick panels are available in a range of realistic textures and shades, including red, white, brown, dark gray, and more. Explore the myriad of design possibilities, indoors and out! Try Our Samples Today.

Order Samples Now

Unsure Where to start?Shop Our Samples To Find The Perfect Finish For Your Project

Order Samples Now

Appearance and Durability of Faux Brick Panels

Everyone will think you hired a professional mason but what they’ll really be seeing is the work of realistic-looking, high-density polyurethane.

This very durable material means your exterior faux brick panels can withstand a wide range of extreme climate conditions, including wind, moisture, harsh cold and scorching sun, and most other forms of wear and tear.

Faux brick panels don’t attract insects or pests, either, and will continue to look great without fading, cracking, or peeling for many years to come.

Shipping and Installing Faux Brick Panels

High-density polyurethane is incredibly lightweight, so it’s more cost-efficient to ship and easier to install than real brick. You won’t need a contractor or a brick mason.

With our simple instructions and tools that you likely already own, it's possible to install our faux brick panels and columns within hours – and without headaches or muscle strain.

See how faux brick panels can work with your home design ideas! Shop Samples of Faux Brick Panels

Tips on Installing Faux Brick Panels

Wondering how to install faux wall panels? It’s easy! One person can easily install our faux brick panels because they're made of high-density polyurethane, which is an extremely durable and lightweight material.

Follow these steps to get started:
  • Lay the panels out on the ground in the order you plan to install them and make sure no specific area draws your eye.
  • All of our brick panels are molded so that you can stagger the seams as you work up the wall. Staggering the seams will help disguise them.
  • Think through the entire installation project and how you might handle the more difficult areas, such as corners, windows, and doors. Figure out the hardest part first. We offer a variety of molded corner and trim pieces that will coordinate beautifully with your panels.

Read more instructions: Interior Installation or Exterior Installation.

Home Design Ideas for Faux Brick Panels

Brick adds depth and weight to your home so it looks as if it's been there forever and is firmly rooted in place. Depending on your preferred style and setting, our faux brick panels can also offer a contemporary, updated look.

Try these ideas for using faux brick panels in your home!

Each of our product pages has a calculator next to the quantity selector. Since each style has unique dimensions, we recommend using the calculator located on the page for your chosen panels.

You can input your dimensions and it will advise on quantities based on the coverage dimensions of the specific panel you have selected.

Each wall panel can be cut very easily with any quality wood cutting tool. Instructions on how to cut a panel can be found in this installation guide.

Our faux brick panels are made from high-density polyurethane. Our products are NOT made from soft EPS Styrofoam. This enables us to make exact replicas of brick products without worrying about product damages and wear down.

Our panels are oversized. The exact dimensions vary by style and are listed under the “Specifications” tab on each product page.

Yes, we can make custom panels for large volume orders and commercial jobs. Please contact us to see if custom parts are an option for your project.

You can see the coordinating item section (ledgers, corners, etc) of the product description on product pages.

Yes. Our high density polyurethane panels can be painted with any good quality water based latex paint.

Yes. Our high density polyurethane panels can be painted with any good quality water based latex paint.

Yes. Our panels are ideal for mobile home skirting. You first would have to frame the area. This article about mobile home skirting may give you ideas.

No. Our panels are very rigid and should not be used on curved surfaces.

Yes, in most cases. To install over most tiles you would only need to make sure that the existing tile is structurally sound and fairly flat/level.

If it is an extremely textured (uneven) tile, such as a tumbled marble tile with designs in it, or if it has a different height bullnose tile running through or between the tiles, then it will need to be removed before installing our products.

If it does have a low profile/flat face surface, then the next step is to make sure it is clean, dry, and secure, we would also recommend that you use a fine grit sandpaper and rough up the surface of the tiles so that the adhesive works better.

The most important thing with any install is surface integrity. If your existing tile or grout is loose or chipping, then you may have to remove it first. You can install our panels over tile using our adhesive only installation instructions.

In many cases yes. Panels require a structurally sound, relatively smooth surface for installation, so it depends on the texture of the stucco. If it is a “slight” (less than ¼”) stucco, you should be able to install our product over it.

If the texture of the stucco is heavy or severe, it will require sanding or removing the stucco so there is adequate surface contact (minimum of 85%) between our product and the wall.

The appropriate installation method will depend on the type of wall beneath the stucco.

If it is some type of plywood, MDF, etc. (standard framing materials) then you would just follow our standard exterior adhesive and fastener installation procedures for panels. If it is concrete or masonry then follow the adhesive-only exterior installation instructions.

Although our products are incredibly realistic, they are not real brick. They are molded out of high-density polyurethane. Polyurethane products have similar burning characteristics to wood and should be considered combustible unless fire-rated polyurethane is specifically ordered.

Most of our products can be used around a fireplace opening/insert, and/or stove, provided you follow the fireplace insert/stove manufacturer's specifications for required clearances. v

When using our products around an open hearth where there will be a live flame (i.e., wood, coal, etc.), you must use some type of non-flammable border.

Based on the National Fire Protection Association (NFPA) codes, a minimum 6” non-flammable border is required for all combustible materials with a thickness of 1 ½”. If a product is selected with a thickness over 1 ½”, an additional 1” of non-flammable border must be added for every 1/8” of additional product thickness.

Some building codes may require a clearance greater than 6”. Please check with your local Fire Marshall for your particular application to ensure you meet the code that applies to you.

Our products are not intended to be used on the hearth. The hearth must be constructed using a non-combustible surface such as marble, stone, or real brick per local and national building codes.

Our products are not suitable for the inside of your fireplace/firebox. Other than this, our standard high-density polyurethane products can be installed using the fireplace/stove manufacturer recommended clearance for combustible decorative building materials.

You must adhere to any, and all, national and local building and/or fire codes.

Yes, most of our lines have a fire-rated polyurethane option. Products made of fire-rated polyurethane are more expensive and frequently have a longer lead time than products made from our standard high-density polyurethane.