PLEASE NOTE that the product dimensions you are selecting are the outside dimensions of the product.
Description of Wire Brushed Real Wood Beams
Crafted to emulate real reclaimed barnwood, Wire Brushed beams matches its texture, color and character to an incredible degree. The wire-brushed finish achieved with a special treatment process removes the soft grain of the wood, and gives them an elegant, handsome look. Up close and from a distance, these beams are remarkably indistinguishable from the real thing. Thanks to this process, the beams are also much less prone to cracking, twisting, warping and checking.
An additional benefit is our inventory’s consistent range of lengths, sizes and colors, which is hard to come by with real salvaged wood. This is advantageous for creating designs that require uniformity throughout, and also makes it easy to cover things like pipes and I-beams. Building trusses with these is also much easier – you’ll never have a piece that’s too long or too short.
Wire Brushed are also available in long lengths, up to 32 feet.
Offered in a great selection of gorgeous colors, these beams are remarkably lightweight, and extremely easy to install. You’ll easily find a style that goes beautifully with your design.
Note: Due to its authenticity, lengths of 14 feet and over requires a joint. Any beam with a width or height larger than 10.5” will have a seam. This seam could be evident when looking at the beam.
Note: Our products may have screws embedded below the surface. We recommend using a hand saw (not power tools) when cutting these products. You may find these screws with a stud finder. Barron Designs is not responsible for any bodily harm or damage to your equipment.
Important! Any products intended to be used in an exterior application needs to be top coated with a high quality clear coat exterior polyurethane with a UV inhibitor to protect the finish from fading.
Construction Box Beam Corners Mitered Sides 3 or 4 (4 sided beams ship as two pieces: a three-sided beam plus a fitted panel to be attached during installation.) Maximum Width and Height 18 inches Maximum Width and Height without Seam 10.5 inches Maximum Length 48 feet Maximum Length without Joint 14 feet Joint Options Butt, Lap, Scarf Wood Pegs at Joint Available Inner Dimensions 3 sided: Approx. 2” less than outer width and 1” less than outer height. 4 sided: Approx. 2” less than outer dimensions. Inner dimensions may vary. Please allow tolerance when covering other materials. Endcaps Available Material Cedar Also available in this texture Custom Trusses, Mantels, L Headers/2 Sided Beams, Planks Texture Lightly Distressed